مميزات خاصة

ENGINE CYLINDER LEAKAGE TEST: cylinder leak gauge set is designed to detect a variety of common engine faults including: worn piston rings, worn valves, cracks in cylinder walls and blown head gaskets. Available with either single gauge shows % of cylinder leakage (marked with color coded range HIGH MODERATE LOW SET), or twin gauge manifold show cylinder leakage and cylinder pressure (0-100psi/0-7bar). Suitable for any gasoline engine with 14, 12 or 10mm spark plugs.
WORKING PRINCIPLE OF LEAKDOWN DETECTOR: Once the leakage tester has been connected to one of the cylinders, compressed air (45-100psi) is fed into that particular cylinder through the built in pressure regulator. Diagnosis is made by observing the amount of leakage that is indicated on the cylinder leakage gauge and by listening for leakage at various points of the cars system. The instruction has detailed introduces about notification, connection method, steps, fault diagnos
CYLINDER COMPRESSION TEST AND DIAGNOSTIC: engine compression tester kit is used for measuring pressure on gasoline engine cylinder quickly and accurately. The gauge readings assist to diagnose if there are following problems: valve sticking, carbon build-up, cracked cylinder head or defective main gasket, poorly seated or worn piston rings, burned or damaged piston. Please refer to the vehicle manufacturer's service instructions or proprietary manual and our manual for details.
WIDE USE OF ENGINE COMPRESSION TESTER: There are 16" long flexible extension hose with 4 sizes (10mm 12mm 14mm 18mm) selectable brass adapters in the cylinder tester set, widely suitable for most types and depth spark plug well on gasoline petrol gas fuel engine cylinder, which is common in motorcycle, car, truck, lawn mower, ATV and so on. Please note, the gauge is not used for most engine, due to the low pressure range 0-300PSI.
UNIVERSAL GASOLINE ENGINE CYLINDER TESTER CONNECTORS: The straight and angled push-on connectors are equipped with rubber tapered tip for easy and quick installation, you just need to push and hold it seal against cylinder head, rather than screw to tighten like 10mm 12mm 14mm 18mm appropriative adapters. These push-on connectors are also for some types and depth spark well, which the appropriative adapters do not fit.

وصف

Descriptions:
This is a high quality TU-21 cylinder leak detector, including double gauge system, 2-1/2" input pressure gauge, snap-on quick connect male connector, gauge scale 0-100PSI, 12mm, 14mm spark plug adapters, air regulator and carry case.

Features:
Designed to detect a variety of common engine faults such as worn piston rings, cylinder head cracks, worn valves and blown head gaskets.
It checks the amount of leakage in an engine cylinder and helps determine the source.
Designed to check the amount of leakage in 4-stroke engines.
Deal for testing trucks and car where clearance is minimal.
Fit for all local and imported cars and trucks.

Specifications:
Condition: Brand New
Material: Rubber, hardware
Color: Red (Shown as picture)
Size: Shown as picture
Spark plug adapter: 12mm, 14mm
Gauge scale: 0-100PSI
Quantity: 4Pcs
Package Weight: Approx. 1836g

Package List:
4 * Leakdown Detector

Notes:
1. Please allow 0-2cm error due to the manual measurement. Thanks for your understanding.
2. There might be a bit color distortions due to different computer resolutions.

مرحبًا،

بحث

مجموعة تسرب الأسطوانة لأسفل طقم اختبار ، محترفة مزدوجة ضغط الضغط على محرك ضغط تسرب التسرب مجموعة لمحرك البنزين مع 10 12 ملم شمعات على دراجة نارية شاحنة السيارة

مميزات خاصة

وصف

منتجات شبيهه