Turncrafter Commander Tailspinner features a Live Tailstock; Tailstock spindle is identical to Headstock spindle with 1" x 8tpi threads and #2 Morse Taper mounting capabilities; Any chuck, center, faceplate, or other accessories can operate as live on the Tailspinner tailstock; Ability to lock the Live Tailstock spindle with the turn of a handle to convert to a traditional lathe's tailstock function. Great for bowl turning; Remount wood blank without fear of misalignment; No need to re-chuck your blank; Leave your faceplate or chuck attached when reversing a bowl blank keeping the bowl exactly centered on the lathe axis; Identical tailstock and headstock means you can mount your work, flip it around, and then flip it back again. Powered by 1-1/2 hp variable speed 110v motor and an SBC microprocessor; Two belt positions: 450-1600 RPM and 950-3600 RPM; Digital readout lets you work at precise speeds; Worklight with 18" flex cable makes it easier to see even the most intricate work. 14-1/2" Distance between Centers; 12" Swing over Bed; 4" Quill Travel; 24 Indexing positions; Cast iron base footprint is 31" x 9-1/2"; Convenient built-in handles; Weighs 106 pounds; Accepts optional extension beds TCLC12XB2 and KWLXBED12. Includes: 6" and 12" tool rest with 1" post, 3" faceplate, (2) 4-prong Dead Spur Centers, 60° Dead Center, Dead Mandrel Saver, Dead Safety Center, Tool Caddy storage rack, (4) hex wrenches, Phillips screw driver, Knockout rod, safety goggles.