Perfect beads every time - The Sculpey Tools Bead Maker helps you make perfectly round bead every time! The set comes with 2 handles, six inserts (2 for each bead size) and 3 measuring cups. Tips for using the Sculpey Tools Bead Maker - Select the measuring cup of your desired size bead. - Firmly press clay into measuring cup until full. Each measuring cup has the bead size on it that you will be making. - Remove excess clay using a straight blade, lay the blade flush against the cup and trim the excess clay.- Remove clay from cup and form into a ball.- Select the inserts that match the measuring cup you used.- Place the inserts into each side of the bead maker. Make sure you have the same size insert in both sides. Bead sizes are on the back of each insert.- Place smooth ball of clay into the center of one insert.- Close the bead maker. (The inserts need to be lined up). Holding the bead maker with both hands, slide both sides back and forth. Your stroke length should be approximately 1-2 in (2.5 cm - 5 cm). Remove the bead from the roller.- If you feel your bead is not as round as you would like, place back into the bead roller and slowly roll back and forth