Print ultra-lightweight parts with confidence and creativity. This lightweight filament uses active-foaming technology to expand inside the nozzle and turn your prints into feather-light creations — perfect for RC-models, cosplay props, or large structural shells. You can reduce weight by up to 65% compared to standard PLA. Set nozzle to ~230 °C (or around 200-260 °C depending on your flow and speed), reduce flow to ~35-40%, and print at 40-100 mm/s. Use this for large wings, display pieces or wearable parts and avoid heavy, bulky prints.
Get flawless matte surfaces and ultra-low part weight with one spool. With LW-PLA you don't just save weight — you also get a smooth, matte finish that's easy to sand, trim, paint or finish. Ideal for model makers, hobbyists, engineers who care about aesthetics and function. Load the filament, calibrate your extrusion multiplier (because foaming increases volume), print at ~230-250 °C, monitor expansion, and use thicker layers or perimeter walls to speed up builds. Great for shells, lightweight housings, or display items where every gram matters.
Transform your 3-D printing workflow with innovative foaming PLA that cuts weight and material cost. Whether you're printing architectural models, prototype shells or drone frames, this filament gives you the efficiency of lighter parts and faster print times. The foaming allows use of bigger layer heights or reduced flow, meaning you need less filament per part. Tip: start at 220-230 °C, print flow at 60-70%, increase only if needed, and ensure good bed adhesion. For finer detail, switch to conventional flow and lower temps.
colorFabb LW-ASA Black 3D Printer Filament, 1.75mm Diameter, 650g Spool, Lightweight Material, UV Resistant, High Temperature Resistant
KWD 17
XT Dark Gray 1.75mm .75kg
KWD 0
CC3D Hard TPU Filament 72D Red 1.75mm 1KG 3D Printer Filament High Hardness High Toughness Flexible TPU Red FDM Printer Tough 3D Printing Material Comparable to Nylon
KWD 9.500
4PCS Led Soft Silament 3V 1900-2100K Length 38MM/130MM/300MM Spiral Bulb Filament Edison Bulb Filament Diode Flexible Filament(4Pcs/11.81in-Green)
KWD 7
