The DIP Sockets are the carrier between the chip and the PCB circuit board, which are good electronic components for connecting the PCB board's chip. The IC socket adaptors are used to secure and connect integrated circuit chips, enabling quick upgrades and simplifying maintenance.
Number of Pins: 20 Flat Pins; Pin Pitch: 2.54mm/ 0.1inch; Voltage: AC500V; Operating Temperature: -40°C~+105°C; IC Socket Size: 25 x 10 x 8mm / 0.98 x 0.39 x 0.31inch(LxWxH); Tin-plated Circuit Board Size: 5 x 7cm/1.97 x 2.76inch(L*W); Package Content: 25 x IC Sockets, 2 x Single-Sided Tin-Plated Circuit Board
The IC chip socket adapter has heat-resistant, low-contact, and good pin stability, allowing it to withstand repeated assembly and disassembly without damaging the chip, with a long service life. The accompanying circuit board uses a single-sided tin-plating process, which enhances its strength and effectively prevents the solder pads from falling off. It is used in conjunction with an IC straight socket for greater convenience.
When you need to replace or install the chip, just remove the connection between the DIP IC chip socket Adaptor and the chip. It can also be used for DIY projects using the matching circuit board.
The spacing and line spacing of the connector holes must be the same as the spacing and line spacing of the chip pins.
MECCANIXITY 100Pcs DIP IC Chip Socket Adapter 8 Pin IC Assortment Kit 2.54mm/0.1" Pitch for Breadboard Project, PCB Board Design
KWD 3.500
MECCANIXITY Mini K Type Thermocouple Wire Connectors Male Plug Adapter High Temperature 220°C(428°F) for Thermocouple Sensor Probe Yellow 10pcs
KWD 6
MECCANIXITY 59" Thermocouple 600 Degree Gas Fireplaces Replacement Thermocouple 11/32" for Gas Furnaces, Oven, Fryers, Boilers, Water Heaters, Thermostat Control
KWD 0
MECCANIXITY Mini K Type Thermocouple Wire Connectors Male Plug Adapter High Temperature 120°C(248°F) for Thermocouple Sensor Probe Yellow 10pcs
KWD 6
