Specification:
Power Source: 2x AA Batteries
Rated Voltage: DC 3V
Rated power: 0.15W
Output Voltage: ≥DC 3000V
Rated Current: 50mA

Instructions & Safety Notice
1. Put the grass powder into the grass applicator, tighten the grid lid
2. Make sure the red wire in the applicator is connected to the metal grid
3. Brush PVC glue on the location where the grass powder needs to be laid
4. Clip the black wire to the PVC glue coated area, turn on the switch and press and hold the red button to start flocking
5. After flocking the metal grid may still exist high voltage electrons, please connect the grid with the black wire for 5 seconds to balance the electrons
6. When cleaning the grass applicator, you should use a long-haired soft brush to brush off the fiber lint, forbid knocking the grass applicatoror wipe with a wet towel or rinse with water
7. When powers on, it is strictly forbidden to connect the black wire to the grid, otherwise it will short circuit and risk of fire or explosion
8. This machine should be kept away from kids in case of electric shock; even adults should take care when using this machine
9. Please follow the steps and mind the Safety Cautions in the Instruction

Package Including
1x Static Grass Flocking Tool (Batteries not included)
1x Glue Brush
4x Bags of 30g different color grass powder
1x Large grid, for 8mm-12mm grass powder
1x Small grid, for 1mm-6mm grass powder
1x Manual Instruction