1 .. is able to fill the interval and effectively transfer the heat of the component that generates heat to the heat dissipator.
2. The thermally conductive silicone sheet has excellent thermal conductivity to meet the requirements for thermal management and the isolation of most electronic products. It is specially designed for the use of heat transfer by interval.
3. At the same time, the product is sticky and easy to use.
4. The carpet is placed between heating and heat discharge component to achieve heat transfer and insulation.
5. For thermal conductivity, isolation, viscosity, elasticity, under heat, filling.
6. Adequate for the storage of CREASTLINE GRADE CARDS, ELECTRODOMESTICS, High Speed ​​Hard Disk, Microwave Heard, High Performance Energy Supply, LED Industry.

Technical data:
Article type: Thermal conductive pad
Size: 100 x 100 x 5 mm / 3.94 x 3.94 x 0.2 inches
Color: blue
Thick tolerance: 0.2+-0.01
Continuously using the temperature: -50 ~ 200 ℃
Conductivity coefficient: 1.5W/m-k
Mass: 10^12
Desglosse tension: 4.5kv
Hardness: 30 ± 5 Bank A
Subject: 2.05
Strength: 15 kg/cm㎡
Extension: 48%
Mystical/fantasy repair note: 90V-0-1
User Manual:
1. Cort the surface, the surface of the object sticks it or clean to remove dust and oil.
2. Tear protective film
The left hand collects the protective film on the side of the product with the right hand and cannot open the protective film on both sides at the same time, which reduces the number and the direct surface with the silicone Vane/Wing to avoid damage to the viscosity and thermal conductivity of the product.
3.
Remove the protective film on the other side, exercise some pressure on the heat dissipator after installation and then repair screws.

Packfelist:
1 x thermal conductivity pillow