1. Compatible with PCI 2.1 specification, supports 32 -bit PCI bus. Plug and Play, IRQ Automatic Allocation and I/O Address.
2. A host can support multiple multiserial cards. Data Bit: 4, 5, 6, 7, 8 bytes.
3. Bit of parity: no same old of space. Stop bit: 1, 1.5, 2.
4. control: None, hardware, xon / xoff. 2000/2003 / Operating System Support.
5. The maximum data transfer rate is up to 1m/s. Compatible with RoHs.

Specifications:
Features:
Compatible with PCI 2.1 specification, supports 32 -bit PCI bus.
Plug and Play, Automatic IRQ allocation and I/O Address.
A host can support multiple multiserial cards.
Data Bit: 4, 5, 6, 7, 8 bytes.
Parity Bit: No of ancient space.
Stop bit: 1, 1.5, 2.
Control: None, hardware, xon / xoff.
2000/2003 / Operating System Support.
The maximum data transfer rate is up to 1m / s.
Compatible with RoHs.
Specifications:
Color: shown how images
Package Weight: 110g
Instruction:
Install a PCI expansion plate for R232 on your computer:
1. Turn off the computer and devices connected to the computer.
2. Open the chassis lid and enter the plate in the PCI slot that is not in use and secure it.
3. Close the chassis cover and connect the conductive wires from the PCI expansion plate to the R232.
4. Start the computer, the step is the installation of the driver.
Driver Location: IO-PC660806A 2S driver on the CD.
Install the 2000 / driver:
1. Start the system.
2. automatically detects the PCI expansion plate to R232. Click the "" to continue.
3. Select "from the list or specify the installation (recommended)" and click the "" .
4. Enter the unit CD on CD-ROM. Select "Include this location in the search:" and click the "search" to continue the installation.
5. In the folder navigation:
the. Select the CDROM unit.
b. Twice click on the SIE folder.
w. Twice click on the 60806a folder.
d. Click the "OK" .
and. Click the "" .
6. The system will automatically find the file in the CD unit, click the "" to continue.
7. Click "Conclude" to start copying the CD unit files.
8. The system will automatically update the hardware configuration.
9. system reboot, PCI to RS232 expansion plate can be used.
10. Upon completion of the program, the system will be automatically restarted to complete the installation of the driver.
List of packages:
1 x PCI for 2 serial port plates
1 x unit cd
Notice:
1. When the PCI expansion plate for R232 is in autoteste on the PC, the system will warn that there is a device.
2. Each PCI expansion plate for R232 is interrupted and is automatically assigned by the system. The door number is determined by the location of the PCI.
3. In the system, if the system does not install other similar products, the door is usually named with3, which is related to the port number with the motherboard.
4. In the system, if you want to replace with the new board and the new driver, you should delete the original plate from the "multifunction card".
5. Forbid to strictly enter or pull the connection card/cable when calling.