Here is your solution for conveniently mounting your Lenovo Chromebox Micro (not included). This mount can be used on any vertical or horizontal surface such as a wall, under a cabinet or desk, or on a vertical side of a desk. The secure holder is compact and easy to set up. First insert the Lenovo Chromebox (not included) into the slot with the ports facing up to the opening. Make sure the mounting holes in the holder plate side are aligned with the device. Fasten the device to the holder with two screws. Place the now attached device and mount at the desired mounting location. If not using the anchors, fasten the mount and device to the wall by placing two screws in the outer holes of the holder. If you are using anchors, use a pencil to mark the location through the holes. Then, using a drill (not included), drill pilot holes at the two marked points on the mounting surface. Insert the anchors and place the wall mount back on the mounting surface and fasten the mount and device in place with two screws. All ports and buttons on the device remain accessible.