The SlimSAS 8i Standard Straight to Low Profile Straight SlimSAS 8i cable is a type of high-speed data cable designed for connecting storage devices in server and data center environments. It is used to establish a reliable and fast connection between SAS (Serial Attached SCSI) controllers and SAS/SATA (Serial ATA) drives or backplanes. The cable is compact and flexible, making it suitable for applications where space is limited. Connector Type: The cable features SlimSAS 8i connectors on both ends. Cable Length: The cable has a length of 0.5 meters (or approximately 19.7 inches). This length is relatively short and is suitable for connecting components within a close proximity, such as between a controller card and a backplane in a server chassis. Data Transfer Speed: The SlimSAS 8i cable supports high data transfer speeds typical of SAS and SATA interfaces. Depending on the specific generation of the SAS protocol and the devices connected, it can support data rates of 12 Gbps or higher, ensuring efficient data transmission between storage devices and the controller. Cable Construction: The cable consists of multiple wire pairs, each individually shielded to reduce crosstalk and electromagnetic interference. These shielding measures help maintain signal integrity, ensuring reliable data transmission even in electrically noisy environments like data centers. Application: The SlimSAS 8i Standard Straight to Low Profile Straight SlimSAS 8i cable is primarily used in server and storage setups where space is limited, and a compact, high-speed connection is required. It is commonly used in blade servers, storage enclosures, and other high-density computing environments. Compatibility: The cable is designed to be compatible with SAS and SATA storage devices, including hard disk drives (HDDs), solid-state drives (SSDs), and backplanes equipped with SlimSAS 8i connectors. Micro SATA Cables Part # LP-2054-8I