Red Ignition Wire: The red ignition wire is not compatible with all models. It is intended for use with vehicle radio harnesses that do not already have an ignition wire. All you need to do is connect one end of the red ignition wire to an ACC wire equipped with an aftermarket radio, and then connect the other end to the ACC harness location behind the vehicle's ignition switch. Make sure your vehicle's OEM radio harness has an ignition wire.
Reliable Material: This car radio cable is made of strong plastic and metal, and it works well. It is hard to break, and it does not get damaged by wear and tear or rust. It can be used for a long time after installation, reducing the frequency of replacement.
How to Set It Up: The wire colour must be matched directly, and the second colour wire must be given attention. It is recommended that you use an insulated connector of some type. In some cases, the pin may need to be moved to use the aftermarket stereo, and the provided red cable may be used to get power from the ignition to ensure that 12 volts of power is available.
Compatible Models: The following vehicles are compatible with this car radio wiring harness: Buick (2004-2009), Chevrolet (GMS 2000-2010, GMS 2001-2009), Hummer H3 (2006-2010), Pontiac (2001-2008), Oldsmobile (2001-2004) and Suzuki Vitara (1999-2004). To avoid incompatibility, please check the plug position in detail before placing an order. This is a modified wiring harness plug and its adaptability depends on the plug part.
Product Includes: 1 x stereo wiring harness, 1 x car antenna adapter and 1 x docking connector. Please confirm the package contents before placing an order. If you have any questions, please contact customer services.
وصف
1.Compatible Models:
-Buick (2004-2009)
-Chevrolet (GMS 2000-2010, GMS 2001-2009)
-Hummer H3 (2006-2010)
-Pontiac (2001-2008)
-Oldsmobile (2001-2004)
-Suzuki Vitara (1999-2004)
2.You can simply connect one end of the red ignition wire to the ACC lead that comes with your aftermarket radio and then connect the other end to the ACC harness location behind the vehicle's ignition switch.
3. Make sure that your vehicle's original radio harness has ignition wires, otherwise the stereo will not turn off or on through the radio harness.
4.Product Includes:
1 x stereo wiring harness
1 x car antenna adapter
1 x docking connector
-27%
انستول باي فلتر ضوضاء IBNF50 50 امبير لكل قطعة
KWD 5.500
متوافق مع طقم أدوات ربط موصل استبدال مكبر الصوت Ford Contour 1995-2000 Factory
KWD 8
توبسترونغجير مجموعة مضخم صوت ترو 0 ايه دبليو جي لتركيب مضخم صوت ايه دبليو جي، تركيب كيبلات
KWD 14
نيو يال محول مدخل مساعد بموصل USB لنظام الصوت
KWD 9.500
