Product Parameters:
Working voltage: DC5-35V
Working current: 2A
Control power: 90W (max)
Static current: 0.015A (standby state)
PWM Duty Cycle: 1% - 100%
PWM frequency: 10khz
Product size: 30*24*15mm (without handle)
Weight: 15g

With high voltage and high current self-recovery fuse, overcurrent automatic disconnect, power-off cooling a few seconds after the fuse automatically restored.

Input voltage selection is divided into two gears:
The default disconnecting short contact applies to 5-35V input voltage.
Connecting short contact for low voltage 3-15V input.
The default disconnect short contact for voltage 5-35V input, you can change the input voltage if you need low voltage.

Steps for use:
1. Turn the potentiometer counterclockwise until you hear a sound from the potentiometer.
2. Connect a DC motor or lamp that meets the requirements of "MOTOR+" and "MOTOR-".
3. Connect the DC power supply at "DC IN+" and "DC IN-".
4. Adjust the knob to control the speed of the motor.
5. If you need to stop, you can turn the potentiometer counterclockwise until you hear the sound from the potentiometer.
6. Remove the power supply before removing the DC motor.
7. Remove the DC motor.

Package Includes:
5pcs PWM Speed Controller Module DC 3V-35V