Description
The lack of phase, phase sequence protector is a new high-tech product using large-scale digital integrated circuits and transformerless design, with strong versatility (3Ph, 220V~380V, 460V~660V, 50Hz/60Hz can be used), small size , Looks very beautiful
Protection features
1. Dynamic phase loss and static phase loss protection: refers to the power failure of any phase when the protected equipment is in operation or non-operation state. The indicator form is: red light is on, and priority
2. Wrong-phase protection: A protective measure to prevent the phase sequence of L1, L2, and L3 three-phase AC power from being connected incorrectly. Instant action. The form of the indicator light is: yellow light is on
3. Voltage unbalance protection: refers to the protection of the voltage unbalance rate that will affect the safety of the equipment due to the unbalance of the three-phase voltage. When the voltage unbalance rate is higher than 8%. The form of the indicator light is: the lack of phase red light is on, and priority is given
4. Delay protection: when a fault occurs, the monitor will act after a delay of 1 to 2 seconds, and the relay will release
TG30S
Size: 72mm*30mm*64mm
Working voltage: 220-440 (220-660) VAC
Output current: 5A
Installation method: 3TH rail installation
Ambient temperature: -25-65
XJ12
Size: 49mm*18mm*87mm
Working voltage: 208-480VAC
Installation method: 3TH rail installation
Ambient temperature: -25-65
Package Included
You choose