Current Sense
DC 100A LED Digital DC Voltmeter Amperemeter DC Voltage Ampere Panel Meter DC 0-100V Voltage and Current Measurement Tool 3-Wire
1. Current transformer is included and no need to purchase separately.
2. Please try not to install the meter and current transformer near high temperature and strong magnetic field
and large , otherwise the accuracy will be affected.
3. In order to obtain higher accuracy measurement, it is recommended to "warm up for 5 minutes" before measurement.
Adjust the calibration.
4. Since the float charge voltage of a 24V battery may exceed 30V after being fully charged, it is not recommended to use it directly.
5. When choosing a range, the larger the better. The larger the range, the greater the error. It is recommended
It is 1.5 times or 2 times the actual test value.
6. This instrument and current transformer have been calibrated on a one-to-one basis. Please do not confuse them during subsequent use.

Power supply voltage: DC4-30V (Note: The input voltage cannot exceed 30V, otherwise it will burn out.)
Test voltage: DC0-100V
Test current: DC0-100A
Display Type: 0.39'' LED with red and green fonts
Measurement rate: 500mS/time
Measurement accuracy: 1% (±2 digits)
CT line length: 150mm
Terminal wire length: 150mm
Size: 70*40*30mm
Mounting hole: 68*38mm
1. Wide power supply range, with reverse polarity protection function.
2. Voltage and current are displayed on the screen at the same time.

Size: 70*40*30mm
Operating temperature: -10 to +50 degrees
Power supply voltage: DC4-30V
Accuracy level: 1% +/- 2 digits
Model: YB4835HVA
Display Type: Numbers only
DIY Supplies:

Installation size: 68*38mm
Measuring speed: about 2 times/S
Display type: 0.39'' LED, red and green digital
Test current: DC0-100A
Test voltage: DC0-100V
Features: Three lines