مميزات خاصة

The lamp hardware is made of carbon steel, the surface is galvanized, has good strength and rust resistance. The toothed washer holds the surface tightly when you turn the nut. This kit saves you the time of searching nuts, pipes and washers one by one.
A good set of lighting parts hardware for places where sockets need to expand, perfect for replacing worn or rusted old parts, repairing broken lamps, fixtures or building your own lamps and lighting products.
The chandelier parts are easy to use, first thread the washer through the threaded tube and then screw the nut into the threaded tube without tools. Each component is made of strong materials, ensuring that your lighting project will last. Lamp fittings are threaded; Easy to screw into nut or threaded holes.
Lamp repair parts are ideal repair and assembly supplies for creating desk lamps, floor lamps, chandelier lamps, and other lighting fixtures, with standard 1/8 IP threads and wires that can easily pass through hollow steel, which allows lamp poles to be easily compatible with various lamp parts.
The fixture part hardware will come with nuts, washers and threaded tubes. The nut is used to tighten the tube and the flat washer distributes the load on the threaded tube to provide a smooth surface. Mainly used to repair or replace chandeliers, ceiling lights or DIY projects. It can also be used to secure and extend threaded pipe quality fixture parts.

وصف

Product name: Lighting kit
Light pole material: carbon steel
Surface treatment: galvanized
Color: Silver
Thread size :1/8IP
Lamp outer diameter: 10mm
Tube diameter :7 mm / 0.28 inches
Tube length :50 mm /2 in
Lamp nut inner diameter: 10mm, outer diameter: 14mm, thickness: 4mm
Flat gasket inner diameter: 10mm, outer diameter: 20mm, thickness:1.5mm
Tooth washer inner diameter: 10mm, outer diameter: 17.5mm, thickness: 0.7mm
Lamp repair parts include threaded tubes, nuts, washers, internal multi-tooth gaskets, which can save you time and effort to find matching parts. Easy to use, first thread the washer through the threaded tube and then screw the nut into the threaded tube, no tools required.
Threaded lamps have a hollow center that allows wires to pass through. In addition, the rear plug can be mounted on the hole to protect the wire from wear. The toothed washer holds the surface tightly when you turn the nut. This kit saves you the time of searching nuts, pipes and washers one by one.
The nut is used to tighten the tube and the flat washer distributes the load on the threaded tube to provide a smooth surface. Mainly used to repair or replace chandeliers, ceiling lights or DIY projects.
Packing contents: 8 light poles (2 inches), 16 nuts, 16 flat washers, 16 toothed washers

مرحبًا،

بحث

yukata مصباح أجزاء أجهزة الأنبوب 2 بوصة 2 بوصة مع مصباح صامد أنبوب غسالة 1/8ip للاختبار لقطع غيار قلادة مصباح إصلاح الأجزاء أقطاب الضوء diy الأجهزة diy 56pcs

مميزات خاصة

وصف

منتجات شبيهه