This torque sensor can be measured torque and rotation speed which can be displayed on OLED display in real time.
Users can perform simple calibration, zeroing, filtering and other operations.
Power value can also be calculated and displayed on OLED
Accuracy: 1/1000 or higher, reliable zero-point
Supports RS485 communication, supports active upload protocol, and the communication rate can reach up to 1000 times/second
The Rotation speed can directly output frequency signal, the maximum speed range is 15000RPM
Allow sensor overload 200%
Non-contact, Maintenance-free, no vulnerable components.

This sensor supports current and voltage output.

If a 120-line code disk is used, the acquisition speed is 25 times per second at a rotation speed of 12.5RPM or above.

Measurement performance: 24-bit AD acquisition chip, acquisition speed 1200 times/second.

Torque value display range -99999-99999, speed value display range 0-99999.

Communication: 485 communication port can execute Modbus-RTU protocol ASCII active upload HEX active upload protocol.

Transmission: 4-20mA, 0-10V (optional)

Button: 3 independent key operations.

Power supply: DC 24V (±10%), 0.2A. Maximum voltage 27.5V, minimum starting voltage 12V.

Speed output: The output of the shaft body rotates one circle, and the output can be selected as 2000-line encoder or 120, 60 pulses.

Working environment: Ambient temperature: -20-70℃; Relative humidity: ≤85%RH; Avoid strong corrosive gases

مرحبًا،

بحث