KT99 Thermostat for Incubator 10A Direct Output Digital Thermostat Temperature Controller Heating Cooling Control Switch
IndependentDual-waytemperature controller.
Heating or cooling control.Red and blue LED display.
All parameters setting can be saved after short circuit.
Directly power output.
Can be used for domestic freezer, water tanks, refrigerator, industrial chiller, steamer, industrial equipment and other temperature-controlled system.
Power Supply:12VDC,24VDC,110V-220VAC ( Please choose the one you need )
Temperature control range: -50~120°C
Resolution Ratio: 0.1°C(-9.9-99.9); 1°C(other range)
Measurement accuracy: ±0.1°C
Control accuracy: 0.1°C
Refresh rate: 0.5S
Sensor1 2: NTC10K Waterproof sensor each
Output1 2: Max 5A directly output each
Environmental requirements: -10-60°C , humidity 20% -85%RH
Size:100mm(L)*55mm(W)*32mm(Depth)
Cutting size: 75(L)mm*55(W)mm M3 screw hole
Power consumption: Static current: 35MA,attract current: 65MA
To ensure long-term use, please use a resistive load less than 5A and an inductive load less than 1.25A
You can use controller 1 and 2 to control two independent systems.Load1 and load2 can be two independent heater/cooler.
You can set different start temperature and stop temperature in controller 1 and controller 2.
Cooling mode: Start temperature stop temperature
Heating mode: Start temperature stop temperature
1 x Dual temperature controller with two sensors( No including retail box )
KT99 (direct output) 120V 1.5m Waterproof sensor -58~248°F
KT99 (direct output) 230V with 1.5m Waterproof Sensor -50~120°C