Loctite EA E-60HP is a toughened, medium- viscosity, industrial grade epoxy adhesive with extended work life. Once mixed, the two-component ep Loctite EA E-60HP is a toughened, medium- viscosity, industrial grade epoxy adhesive with extended work life. Once mixed, the two-component epoxy cures at room temperature to form a tough, off-white, bondline which provides high peel resistance and high shear strengths. The fully cured epoxy is resistant to a wide range of chemicals and solvents, and acts as an excellent electrical insulator. TYPICAL APPLICATIONS The high performance epoxy provides excellent bond strengths to a wide variety of plastics and metals. Ideal for general purpose industrial applications requiring extended work life for adjusting parts during assembly. Curing Properties (@ 25C unless noted) Typical Value Working Life, minutes 60 Tack Free time, minutes 120 TYPICAL PROPERTIES OF CURED MATERIAL (@ 25C unless noted) Physical Properties Typical Value Dielectric Strength, Volts/Mil 500 Tensile Strength ASTM D638, psi 5,100 Tensile Elongation ASTM D-638, % 9 Hardness ASTM D-1706, Shore D 80 Glass Transition Temperature, C 70 Chemical / Solvent Resistance Cured for 5 days at 22°C on steel with no induced gap, aged under conditions indicated and tested at 22°C. Solvent Temp % Initial Strength in: Air 87°C 500hr 1000hr Motor Oil (10W-30) 87°C 138 146 Unleaded Gasoline 87°C 99 125 Water/Glycol (50%/50%) 87°C 102 110 Salt/Fog ASTM B-117 22°C - 81 95% Relative Humidity 38°C - 116 Condensing Humidity 49°C - 94 Water 22°C - 94 Acetone 22°C 77 93 Isopropyl Alcohol 22°C 91 104