1.Characteristic

This tester has the characteristics of high measurement accuracy, wide measurement range, simple operation, easy to carry, stable operation, etc.,
It can be widely used in the industries of shot blasting, sandblasting, printing, spraying anticorrosion, and mechanical processing, including the detections of flat surface, inclined surface,cylindrical surface small holes, grooves, axles and other metal and non-metal flat and uneven surfaces.

2.Function

1.Buttons:on/off ,zero.mm/inch,data hold,max/min
2.Operating temperature :-10-40°C
3.Humidity:≤80% RH
4.Battery :3.7V lithium battery(Rechargeable battery),Charging /communication interface :USB Type-C
5.Directly measure the maximum,minimum value and range
6.Analog pointer
7.Absolute measurements
8.Data output

4.Technical Parameters

Model number:GS5337
Measuring range :0-6.5mm/0-6500um
Accuracy:±3um
Resolution:1um
Power supply mode:3.7V lithium battery
Charging/communication interface :USB Type-C,RS232 Interface signal
Waterproof :IP54

5.Usage

1. Press ON/OFF key to start up.
2. Put the tester on a flat place, such as glass plate, and press ZERO/MAX/MIN key to clear to zero.
3. After zero cleaning, it can be used to measure the surface to be measured.

6.Accessories

main unit*1
Glass standard block*1
Charging kit*1
data output set*1
Carrying Case*1
Operation Manual*1