This UCP PILLOW BLOCK MOUNTED BEARING consists of an INSERT BEARING and a CAST IRON housing. The PILLOW BLOCK can be mounted on levelled surfaces using the Two Bolt Holes. Grease Fitting Offset on top, to Relubricate the bearing. The INSERT BEARING has Two Metal Shields to Protect the Bearing from Dust or any Possible Contamination. Bearing is Pre-Lubricated with High-Quality Grease ideal for use in High and Low-temperature settings. Has a Set Screw Lock on its surface, for securing the shaft. - Specification: Item UCP213-40, Series UCP200, Bearing Number UC213-40, Housing Number P213, Bearing Bore Diameter Metric 63.50 mm, Bearing Bore Diameter Inch 2-1/2 in, Bearing Width Inner Ring Matric 68.30 mm, Bearing Width Inner Ring Inch 2.689 in, Bolt Size 3/4 in, Number of Bolts 2, Bolt Hole Center to Center (e) Matric 203 mm, Bolt Hole Center to Center (e) Inch 7.992 in, Overall Length (a) Matric 265 mm, Overall Length (a) Inch 10.43 in, Overall Height (w) Matric 150 mm, Overall Height (w) Inch 5.906 in, Overall Width (b) Matric 70.00 mm, Overall Height (b) Inch 2.756 in, Mounting Surface to Shaft Center (h) Matric 76.20 mm, Mounting Surface to Shaft Center (h) Inch 3.00 in, Dynamic Load Rating Cr 57200 N, Static Load Rating Cor 40000 N, Limiting Speed 3000 r/min, Bearing Clearance Normal, Bearing Sealing type Contact standard, Lubrication Type Grease Shell RL2, Lubrication Temperature -20°C to +160°C, Rolling Element Indicator Ball, Bearing Material Gcr15, Housing Material H200 Cast Iron, Locking Type Set Screws, Weight 5.00 KG.