【Dimension】Momentary Tactile Switch: 6x6x4.3mm/0.23x0.23x0.16inch(L x W x H); 6x6x5mm/0.23x0.23x0.19inch(L x W x H); 6x6x6mm/0.23x0.23x0.23inch(L x W x H); 6x6x7mm/0.23x0.23x0.27inch(L x W x H); 6x6x8mm/0.23x0.23x0.31inch(L x W x H); Solder Wire:100mm x 0.6mm/3.93inch x 0.02inch(L x W).
【Wide Application】This Momentary Tactile Switch is widely used for electronic toys, camera, voice recorder, monitor, intercom, MP3, MP4, DVD, audio, digital cameras, fAir conditioner remote control, lighting control, game controller, mobile, TV, microwave oven, electric cooker, electronic scales.
【DC 12V 50mA】Momentary Tactile Switch is direct current for 50 mA and 12 volts (V) in a direct current (DC) circuit. This means the switch can operate safely under these parameters.
【Momentary Tactile】 The main function of this switch is to trigger the circuit to close or open immediately when it is pressed, so as to achieve fast signal transmission or control action.
【High-quality material】The pins are made of high-quality silver plated brass material, which has higher corrosion resistance, wear resistance, no rust and good conductivity.
【flame-retardant shell】 The shell uses flame-retardant materials, which can effectively slow down the spread of fire when encountering high temperatures. It has excellent fire-proof performance, ensuring the stability and reliability of the socket in daily use.
Detail:
Product name: Momentary Tactile Switch
Operation Mode: Push Button/ON-OFF
Current Rating: 5E+1 Milliamps
Operating Voltage: 12 Volts
Contact Type: Normally Open
Connector Type: Through Hole
Terminal Quantity: 2 Pin
Contact Material: Silver Plated Brass
International Protection Rating: IP65
Operating temperature range: -25~85℃
Contact resistance: 50mΩ MAX
Insulation resistance: 100mΩ MIN
Voltage resistance: AC 250V(50Hz) / min
Mechanical life: 100,000 times
Color: Black
1. Regular inspection: Check the switch regularly to ensure that its appearance, function and electrical connection are in good condition.
2. Cleaning and maintenance: Use a soft cloth or brush to clean the surface of the switch, and avoid using corrosive cleaners. At the same time, pay attention to keep the area around the switch clean and dry.