Plug Valves
About this product
ball valve consists of valve body and actuator. The actuator drives the valve core to rotate 90°. The actuator is driven by a synchronous motor and has a built-in limit contact, so that the valve can be powered on for a long time and work continuously. It has the advantages of simple structure, reliable operation, large through-flow, energy saving, and can replace the solenoid valve. It can be widely used in heating, central air conditioning, solar hot water systems, and water treatment systems for hot and cold water switch control.
Specification
Medium: cold water, hot water or 50% ethylene glycol solution
Body material: brass
Wiring mode: 2 wires, power off reset
Working form: Normally closed/normally open
Driving voltage: 220VAC, 110VAC, 24VAC, 24VDC, 12VDC
Power consumption: 6W (only when the valve is open and closed)
Applicable medium temperature: 0-90℃
Action time: 5-15S
Nominal pressure: 1.6Mpa
Lead length: 30CM