Pulse Generators
Product content:
Control card*1
USB signal cable*1
CD*1
MPG*1
Product introduction:
support software, through USB port to communicate with computer.
Performance parameters:
Support USB;
16 ports isolated input interface;
16 ports isolated output interface;
1 port 0-10V speed analog output interface(can change to PWM output);
can support 6 axis stepper systems maxisim,125KHz pulse output for every axis;
ARM motion control chip;
main device is 12V-32VDC power supply input,current should higher than 1A;
Appearance and size:
NVCM motion controller is with the sealed open structure, there are 4pcs setting holes at
the bottom. We can fix 2pcs 3mm diameter holes at the cabinet, and install the controller into the
cabinet.The controller appearance as the Figure 1-1 and Figure 1-2 show:
The products overall size is 150mm*84mm*20mm;
The bottom install size is 125.5mm*71.5mm.
Power scheme:
Wiring definition:
1. USB port
2. Main power input
3. Limit/Home/Estop/Probe input port
4. Serial expansion interface
5. MPG port
6. Universal output interface 2
7. control output/ Universal output interface 1