Pulse Generators
Wireless handwheel (instead of wired handwheel)
Number of axes
4
Emergency stop button
No
Communication frequency
433MHZ
anti-interference
The same range supports 32 sets of equipment to operate stably at the same time
Pulse signal
Support differential and non differential, NPN, PNP and other signal types
relevant
Support point to point
Parameters related to model selection
Please let us know your model number after selection
Signal transmission distance
40 meters wireless operating distance
parameter
A pulse encoder, 100 pulses/turn
Model selection:
Selection parameters
1 Appearance of the product:
A /B/C/S/E represents the model of A/B/C/S/E .
2 TWGP: means with emergency stop button;
WGP: means without emergency stop button
3 Pulse signal standard:
01:Represents 5V, 25 mA; A, B pulse signal output: 100PPR
03:Represents 5V, differential signal; A, A-; B, B-; pulse signal output:100PPR
02:Represents 12V, 5 mA; A, B pulse signal output: 25PPR (suitable for system)
04:Open circuit output; A, B pulse signal. Low level, NPN output. (suitable for system)
05: output; A, B pulse signal, high level output, PNP output.(suitable for system)
4 The number of axes supported by the handwheel:
5 means 5 axes;
6 means 6 axes;
7 means 7 axes
5 Handwheel axes selection output mode:
A means point-to-point output;
B means coded output (support binary, gray code, etc.)
6 Handwheel maglification output mode:
A means point-to-point output;
B means coded output (support binary, gray code, etc.)
7 Expansion buttons on the handwheel:
3 means supporting 3 expansion buttons;
X means that the magnification signal is a special output mode of pulse output, which is unique to systems.
No X means that the magnification signal is an ordinary signa output;
8 Indicates the working voltage of the wireless signal receiver:
05 means 5V power supply;
12 means 12V power supply;
24 means 24V power supply