Spec:

Item Type: Thread Inserts
Material: Stainless Steel
Model: Slotted Threaded Insert
Quantity: 20pcs
Size:
Female Thread: M6 x 1.0
Male Thread: M10 x 1.5
Length: Approx. 14mm / 0.55in
Reference Drilling Diameter:
Plastic: 9.0-19.2
Alloy: 9.2-9.3
Cast Iron: 9.3-9.4
Minimum Drilling Depth: Approx. 15mm / 0.59in

Package List:
20 x Thread Inserts

How To Use:
1. Opening: Based on the material of the workpiece, select the range of drilling diameter. Please refer to the specification table for the range of openings.
2. Place the slotted end or three hole end downwards, install the self tapping threaded insert on the front end of the tool, vertically press it against the workpiece, turn the wrench, and turn it into the bottom hole.
3. After inserting into the specified position, fix the hex part of the tool with a clamp, and then reverse the wrench to separate the tool from the workpiece.