مميزات خاصة

MINI THERMOSTAT: Smart thermostatic heating table in super mini size with 3D printed shell without layering
FUNCTIONS AND EFFECTS: The heating soldering plate can eliminate redundant functions, retain enough effective heating area, greatly saving energy consumption and heating time
DISPLAY AND CONTROL: Welder hot plate with Organic Light Emitting Diode screen display, support temperature control
LOW LOSS: The application field of the soldering hot plate is wide, and the operating parts are centrally preheated to reduce the damage to nearby parts
FAST AND EFFICIENT: Chip welding station supports USB Type C interface and PD protocol for faster heating speed

وصف

Specification:
Item Type: Heating Soldering Plate
Input Interface: Type C
Power Supply: PD65W 20V 3.25A (PD65W recommended)
Temperature Range: 0℃~350℃ (the lowest temperature is ambient temperature, can only be increased, can not be reduced)
Shell: 3D printed shell, no layering
Product Size(LxWxH): Approx. 5.6 x 5.6 x 3.5cm / 2.2 x 2.2 x 1.4in
How to Use:
1. Double Keys Pressed At The Same Time: Heat or stop heating
2. Press and hold twice to enter the menu screen or exit
3. Press and hold the double key to confirm
Package List:
1 x Heating Soldering Plate
Notice:
1. The recommended temperature should not exceed 250℃.
2. The power supply needs a charger that supports the PD protocol, the voltage is 20V 3.25A, and the voltage that can support the PD protocol is 20V in .
Heating Soldering Plate Welder Hot Preheating Chip Welding Station 20V Mini Smart Thermostat for Repair DIY Laboratory

مرحبًا،

بحث

لحام التدفئة لحام اللحام الساخن للتسخينات لحام الرقائق 20V Mini Smart Thermostat لإصلاح مختبر DIY

مميزات خاصة

وصف

منتجات شبيهه