Current Clamps
DC 0-300A DC3.5-30V 4.5-100V LED digital voltage and current meter three-wire DC voltmeter ammeter voltage ampere panel meter voltage tester
1. 999mA, 2A, 5A, 10A, 20A, built-in shunt.
2. If the current exceeds 20A, a shunt must be used to work, even if it is 0.1A, otherwise it will burn out.
3. For currents above 20A, the shunt is not built-in and needs to be purchased separately.

4. Because the floating charge voltage of a 24V battery after being fully charged may exceed 30V, it is "not" recommended to use a 24V battery directly.
Supply voltage: No additional power supply required (power is taken from the circuit under test)

Display mode: 0.39" LED, red for voltage, green for current
Dimensions: 70 x 40 x 30 mm
Mounting opening: 68 x 38 mm
Measurement rate: 500mS/time
Measurement accuracy: 1% (±2 digits)
Wide power supply range: DC3.5~30V/4.5-100V, with reverse polarity protection.
The voltage and current are displayed on the screen simultaneously.

Equipped with a back cover, safe, reliable and dustproof.
Automatic decimal point shift

Meter power supply: two-wire terminal
Black wire: negative pole of power supply.
Red wire: positive pole of power supply.
Test terminal: three-wire terminal

V+: Test positive voltage input
A+: Test positive current input. Can only be connected to the negative pole of the load and the negative pole of the load power supply.
This instrument is equipped with three wiring terminals.
Test terminal: three-wire terminal
COM: Test common terminal (COM is the common negative pole of the voltmeter and ammeter)
V+: Test positive voltage input
A+: Test positive current input, can only be connected to the negative pole of the load and the negative pole of the load power supply

Model: YB4835VA
DIY Supplies:
Size: 70*40*30mm
Working temperature: -10~+50 degrees
Accuracy level: 1% +/- 2 digits
Power supply: DC

Test voltage: DC3.5-30V/4.5-100V
Test current: DC500A
Display mode: 0.39'' LED, red and green digital
Features: Three lines