Easy to carry and use, easy to install
Application
The tap die socket adapter is used for machine taps, and is suitable for wind batches, electric batches, electric drills, etc.

Safe Clamp
The square head of the adapter with the built-in clip in the sleeve is driven, so that the tap die and the socket adapter are firmly connected, and it is not easy to fall off.

High Concentric Rate
The tapping chuck with a diameter of 1.5-16mm with a 1/4"hex shank meets the requirements of machine taps of the same size. High Concentric Rate.

high Strength
The tap die socket is made of chromium-molybdenum alloy steel, and the tap material is high-speed steel. High strength and is not easy to wear. Make it work smoothly.

HSS Machine Tap
The tap is made of wear-resistant high-speed steel, with easy tapping and low resistance.Suitable for processing iron, aluminum, plastic, wood and other materials.

Size
There are total 8 pieces of taps in different sizes from M4 to M16 that you can use for tapping various threads.M4-M8 non-hole tip head, M10-M16 middle hole flat head.