Specifications

Material: Cast Iron, Silicone, PTFE
Color: Black
Process: Painting
Motor: Pure Copper Motor
Mounting Type: Floor Standing
Power Source: Corded Electric
Plug Type: US Standard
Capacitance: 45μF
Thermal Protection Temperature: 55°C/131°F /p>
Voltage: 110V, 60Hz
Current: 9.5A
Power: 0.55KW(0.75hp)
Rotating Speed: 3420rpm
Water Pump Inlet: 2.54cm/1in
Water Pump Outlet: 2.54cm/1in
Noise: 0-30dB
Maximum Head: 56m/183.73ft
Maximum Pressure: 5bar
Maximum Suction: 10m/32.8ft
Maximum Flow Rate: 3.8m³/h/1003.85GPH
Power Cord Length: 1m/3.28ft
Product Size: 43*19*22cm/17*7.5*8.7in
Package Size: 48.5*20*30cm/19.09*7.87*11.81in
Gross Weight: 14.1kg/31.09lbs
Net Weight: 13.4kg/29.54lbs

Package Included
1* Jet Water Pump
1* Sealing Tape
1* Power Cord
1* Multilingual Manual

Notes
1. Adding water to the pump head until it is full helps to speed up the inlet flow rate. The inlet pipe (not included) shall not be excessively bent and the end pipe (not included) shall be completely submerged. Please note that it is only suitable for clean water.
2. Please read the operating manual completely before use, and pay particular attention to the safety instructions included. Please discharge the waste water if not used frequently and please do not run the pump without water.
3. Please do not wet the motor before first use, and fill the pump head with water to wet the impeller. Please perform a water test after the installation is complete to check for leaks and other conditions.