High-quality material: The pot body of this sugar coating machine is made of thickened 304 stainless steel with a thickness of up to 6.9 mm. Its compact design minimizes the space occupied on the countertop and is easy to operate. According to the size of the pills and user needs, the tilt angle can be adjusted to achieve a better polishing effect
Speed adjustment: The tilt angle of the polishing machine can be adjusted according to the particle size and user needs to reduce debris and burrs, 0-72r/min to achieve a better polishing effect. (Note: Speed adjustment is only applicable to 220-volt models; 110-volt models run at a fixed speed). Simply adjust the speed to easily control the coating thickness
Large capacity: The diameter of the sugar coating pot body is 320 mm, and the diameter of the pot mouth is 170 mm, which can make full use of the material, polish more materials at a time, and the single output can reach 1-3 kg. Extra-large heat dissipation holes for effective heat dissipation; equipped with a handle, the body weighs only 13.5 kg, which is easy to carry
Additional configuration: The external hair dryer can adjust the blowing distance, and the additional fan and bracket greatly reduce the possibility of burns. The blower adopts three adjustable modes: constant temperature and cold air, suitable for various raw materials that require different air volumes
Wide application: This snack coating machine is fully functional and can be used for a variety of purposes such as pill coloring, candy drying and polishing, tablet coating, food seasoning, candy coating, etc. It is suitable for rolling spherical or granular objects in the food, light industry, and chemical industry
وصف
Specifications:
Rated power: 200W
Rated voltage: 110V/220V
Pot body diameter: 320mm
Pot mouth diameter: 170mm
Pot body speed: 58r/min
Machine output: 1-3kg/time
Dimensions: 40*30*42cm
Machine weight: 13.5kg
Instructions:
1. Pour the pills to be polished into the polishing ball. Each time you pour, the pills should be 2cm below the mouth of the polishing ball to avoid overflow.
2. Turn on the power switch and roll for more than 10 minutes. The longer the rolling time, the smoother the surface. During the kneading process, spray an appropriate amount of water according to the dryness of the pills.
3. If the pills need to be waxed, use a hair dryer to slowly melt the beeswax while polishing the pills. No need to use a hair dryer for normal polishing.