Installation requirements: The tool handle should be in good contact with the chuck, with a clamping depth of at least 1 inch to provide sufficient clamping force and avoid inserting only a small part that may cause the handle to break. To use a suitable size chuck, if the chuck is worn, out of roundness, or has a taper, it will cause insufficient clamping force, vibration, and even tool flying out; If there is uneven contact with marks or grooves on the tool holder after clamping, the new
Safety precautions: Wear personal protective equipment such as goggles and earplugs when using. Keep the work area clean and tidy, avoiding distractions from clutter. During processing, it is advisable to use an overhead machining method to reduce the clamping force and frictional heat of the workpiece on the fixture. During the operation of the tool, a gradual deceleration and stopping method should be adopted to prevent sudden shutdown from damaging the tool or workpiece.
Maintenance and upkeep: Clean the cutting tools after use to ensure there are no residual debris or chips, and to avoid damage to the fixtures; It is also necessary to apply appropriate lubricating oil to reduce the wear of cutting blades. Regularly inspect the blades and replace severely worn ones in a timely manner to ensure machining accuracy and efficiency. When storing, it should be placed in a safe place, away from harmful substances and high temperature environments.
Tool alignment and positioning: Before using a chamfered end mill for machining, it is necessary to accurately align and position the tool. Ensure that the center of the tool is aligned with the machining position of the workpiece to ensure the dimensional and positional accuracy of the chamfer. Accurate tool alignment can be performed using a tool alignment instrument or other measuring tools. In CNC machining, it is also necessary to set the compensation parameters of the tool, such as radius
In terms of equipment, it is suitable for electric routers, edge trimmers, CNC engraving machines, woodworking engraving machines, X engraving machines, 3D engraving machines, and most handheld engraving machine routers with 1/4 inch clamps. Generally, it cannot be used for equipment such as electric drills and drilling machines.
وصف
HRC55 Internal R Chamfer Milling Cutter Tungsten Steel Carbide Coating 4-Flute For CNC Machining Center Endmills
Hign-concerned Chemical : None
Coating : AlTiN
Material : Carbide
Name : Internal R Chamfer Milling Cutter
Hardness : HRC55
Flute : 4-Flute
Processing Materials : 45 # steel, mold steel, pre hardened steel, cast iron, etc
Applicable Machines : CNC Machining Centers, Engraving Machines, Etc High-Speed Machines
2 Flute HRC55 كربيد الكرة الأنف نهاية الطحن القاطع 2 المزامير R0.5-R4.0 بتات الطواحية الطاحونة لتأليف المواد الصلب CNC (2F55CR3X6X50L)
KWD 9
2 Flute HRC60 Ball NOSTENG END MILL R0.5-R5
KWD 9.500
2 Flute HRC55 Ball NOST END MILL R0.5 R1 R2 R3 R5 R5 4MM 6MM 8MM SHANK DIMETER TUNGSTEN CARBIDE CNC MILLING CUTTER (R5.0X10DX75L)
KWD 29.500
2 Flute HRC58 BALL END MILL TUNGSTEN CARBIDE CUTTER CNC ROUTER BET MILLING CUTTER TOUT R0.5 6MM 8MM 10-20MM للصلب المعدني (R1.5x3DX100L)
KWD 17
