𝟴𝟬𝟱𝗣 𝗣𝘂 𝗚𝘂𝗻 𝗙𝗼𝗮𝗺 𝗠𝘂𝗹𝘁𝗶 𝗣𝘂𝗿𝗽𝗼𝘀𝗲 805P is a single-component PU foam used with an applicator gun and features higher yield, easier application and reusability. It does not contain any propellant gases which are harmful to the ozone layer. Our spray polyurethane foam is a material that is applied with a spray gun and is frequently used to fill cracks and insulate buildings, increasing their comfort and energy efficiency. 𝗜𝗡𝗦𝗧𝗥𝗨𝗖𝗧𝗜𝗢𝗡 ✔️The optimal can temperature is 68 °F. Application temperature is between 28 °F and 86 °F. ✔️Shake the can well before use. Screw the can onto an applicator gun. The output of the foam can be regulated with the trigger and controlled with the adjustment screw on the back side of the gun. ✔️Always keep the can upside down during application. ✔️Fresh foam can be cleaned by Akfix Foam Cleaner. Cured foam can be cleaned barely mechanically 𝗦𝗔𝗙𝗘𝗧𝗬 ✔️Harmful by inhalation. Irritating to eyes, respiratory system and skin. Do not breathe spray/vapour. ✔️Wear suitable protective clothing and gloves. Use only in well-ventilated areas. ✔️Pressurized container. Keep away from direct sunlight and do not expose temperatures over 122 °F. ✔️Do not pierce or burn, even after use. ✔️Keep away from sources of ignition, and no smoking. ✔️Keep out of the reach of children.