5Pcs SOIC8 SOP8 Flash Chip IC Test Clips Socket Adpter BIOS/24/25/93 Programmer

Instructions:
The total length of the clip is approximately 42CM
Pinch the chip as far as possible to open the clamp head. The red edge corresponds to the first pin of the chip clamp, and the blue board indicates the first pin of the plug-in programmer. These two points are correct
Wide and Narrow 8-Foot Universal Clip.

Specification:
Test clip: SOIC 8/ SOP8
Connector type: Test Clip
Pin format: SOIC / SOP
Qty:5Pcs

Package included:
5Pcs SOIC8 SOP8 Flash Chip IC Test Clip

Before purchasing, please note:

Some boards can directly clamp the chip, but some boards cannot be operated in this way because the chip on the board will be affected by the peripheral circuit. Please be aware of this before placing an order, so as not to buy it back and make it unusable.

Chip soldering is like a universal mount that can be used directly, and both wide and narrow bodies are compatible

When encountering a programmer with a protected function, the clamp cannot read at normal voltage, and a voltage of 3.3V needs to be applied.

The method is to clamp the chip with a clip, and apply a voltage of 3.3V to the pin corresponding to pin 8 of the chip.

Generally, a 3.3V power supply has two wires, so VCC should be connected to the clamp, and the other wire should be directly grounded.