Bridge non opening type engineering nylon towline cable protection chain drag chain tanks chain
15X20 ; 15X30
Package Included:Drag chainX1 Meter (Include the end connectors)
Uses and Features:
1) Suitable for use in a reciprocating motion of the occasion, can be built-in cable, tubing, pipe,plumbing, etc. play traction and protection.
2) Each section towline can open, easy installation and maintenance. Exercise low noise,wear-resistant, high-speed movement.
3) The towline has been widely used in CNC machine tools, electronic equipment, stone machinery,glass machinery, doors and windows machinery, injection molding machines, robots, overweighttransportation equipment, automated warehouses.
Plastic towline structure:
1) The towline shape like tanks chain, composed by a large number of unit links between therotating freely link.
2) Within the same series of towline high, outside the high, the same pitch, towline in width, bend radius R may have a different choice.
3) Unit chain around the chain plate and the upper and lower cover composition, towline can openeach section, easy assembly and disassembly without threading, to the cable, tubing, pipe, pipe,etc. into the towline after opening the cover.
4) Also available separators, the chain separated by space as needed.
Towline selection of main parameters:
Within high: Select built-in cable, tubing, pipe, pipe, etc. As one of the most coarse reference height,plus at least 10% of the height of the space within the towline as high. If the overlap byoverlapping the actual height as the reference height.
Wide: Choose thicker some cables, tubing, pipe, water pipes, with its outer diameter and as thetowline wide reference, and stay at least 10% of the width of the space.
Bending radius R: choose built-in cable, tubing, pipe, pipe, etc. The maximum bending radius as a reference value, and left more than 10 percent of the space.
Use towline length = R + 0.5R + stroke / 2
After bending towline total height = 2R + external high
Towline place principles:
Should leave 15% of the remaining space for built-in cable, tubing, etc., may move freely in theradial direction of the towline does not produce tension. Larger diameter difference between thewire should be laid separately, weight distribution, if necessary, be separated by the dividing sheet.
In the high-speed or high-frequency operation, to try to make the wires apart from each other on a level, do not make it mutually stacked more time in the cable, pipe, tubing, etc. is recommended to use separators.
=========
Hign-concerned Chemical : None
Tensile Strength : 1178kg/cm2
Type : Leaf Chain
Standard or Nonstandard : Standard
Material : plastic
Pitch : 20mm
Max outer diameter of cable : 12mm
Pore size : 4.2x7mm
Joint hole pitch : A=14mm
Type : Bridge Type
Open mode : Non opening
Material : PA66
Bending radius : R28/R38
Optional specifications : 15X20 ; 15X30