مميزات خاصة

【Excellent Suction】The maximum lifting horizontal load of each vacuum suction cup is 165.35lbs, and the vertical load is 132.28lbs, so it can be used to lift most heavy objects easily without slipping and loosening.
【High-quality Material】Suction cup lifter is made of durable, tasteless and high-strength rubber and stainless steel handle so that it is not easy to be deformed or damaged. The handle is sprayed with plastic to prevent corrosion and rust, so it can last for a long time.
【Labor-saving】This suction cup heavy duty is strong in grip and ergonomically capable of firmly adhering to smooth surfaces, such as glass, marble and ceramic tiles. Suction cup glass makes it easy to carry these smooth objects.
【Large 6-inch Suction Cup】The diameter of each suction cup is 6 inches. The larger window suction cups heavy duty has a larger suction area, which can absorb objects more firmly.
【Easy to Use】You just need to put it on a smooth surface, press the hand pump, and then the glass suction cup will produce a vacuum. When the residual vacuum degree displayed is less than 100%, you just need to press the handle pump until the original vacuum pressure is reached, without removing it for re-adsorption.

وصف

Specification
Material: Stainless Steel+Rubber
Color: Green+Yellow+Black
Style: Ergonomic
Applicable Surface: Flat/ Curve Smooth Surface
Max Horizontal Load of Each: 75kg/165.35lbs
Max Vertical Load of Each: 60kg/132.28lbs
Package Size: 19*15.5*15.5cm/7.48*6.1*6.1inch
Product Height: 18.5cm/7.3inch
Product Diameter: 15cm/6inch
Gross Weight: 0.8kg/1.76lbs
Net Weight: 0.7kg/1.54lbs

How to Use
1. Place the suction cup on the contact surface so that the red line can be seen when lifting the load.
2. Pump the plunger until it is fully connected. When the red line is hidden, it indicates that the vacuum is sufficient.
3. If the red line appears during lifting, please immediately put down the load and pump the plunger until the red line is hidden again.

Package Included
1*Vacuum Suction Cups

Notes
1. Please always inspect vacuum suction cups before use. Clean them and the load surface between each lift. Make sure both surfaces are dry and free of any dirt or obstruction. Make sure the handle pump has enough lubrication for the pump. Please check whether the elasticity of the vacuum suction cup is good and whether there is damage and obvious abnormal distortion.
2. Before use, please test the suction of the vacuum sucker on a small piece of material. Clean the surface with soap and water with a clean sponge or lint free cloth.
3. Please use it on a clean, relatively smooth, non-porous, oil, grease or water-free surface at a temperature of -12-49℃/10-120°F, because water or pollutants will reduce the skid resistance of the cup.
4. Please allow the slight color difference caused by the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind before ordering.

مرحبًا،

بحث

كوب شفط رأسي ، 6 "أكواب شفطية شاقة مع مقبض معدني ، أكواب مملوكة لليد العمودي للأسطح المسطحة إلى المنحنية ، ضخها مع غطاء واقعي (حزمة واحدة)

مميزات خاصة

وصف

منتجات شبيهه