Controller
DimmersModel: 1. 110V LED 4/6 remote control switch2. 220V LED 4/6 remote control switchnotes:6 sets of light control only require 220VSpecification voltage: AC100-130V or AC200-240V (2 choices)Power: 1000W/channelTotal power: 4/6 channels × 1000WRemote control: wireless radio frequency induction remote controlRemote control distance: greater than or equal to 30MRemote control battery: 23A 12V (battery not included)Remote control switch function: Press the corresponding keys "A B C D" on the remote control to turn it on or off independently. Press the "OFF/ON" key to turn it on or off.The white wire on the left is the signal wire and is not connected. (Picking up any cord will damage the receiver).Note: The remote control switch receiver is generally connected to the lamp chassis (light panel) the receiver is connected in series with the original switch and the remote control is used to synchronize with the original switch. You can also directly connect to the 220V power supply so it can be completely controlled by the remote control! There are no restrictions on the installation location of the receiver. It can be installed wherever you think is appropriate as long as it is convenient for you to connect.Installation requirements 1. Before installation whether the product leads are intact and whether the access voltage and load are consistent with the product identification.2. Power lines lamps and supporting switches should comply with corresponding electrical standards.3. Connect strictly according to the wiring diagram.4. Warm reminder: When the remote control indicator light dims the remote control distance becomes shorter and the sensitivity decreases. Please replace the battery.Package Included:1x* LED Controller (without battery) (according to your choice)