Suggestions Mount the solenoid valve so that the coil is up. In the installation, such as a strainer before the solenoid valve, etc. use filters. We use more durable diaphragm and gasket material for high temperatures Please specify your diaphragm and gasket request for high temperature in your orders. Things to Consider When Choosing a Solenoid Valve: The coil should be selected in accordance with the operating voltage (AC-DC). Protection and insulation should be provided according to the place where it will be applied. (Electricity turns on when air comes in, and turns off again when you cut off the electricity) In the line or system you will use, min. and max. pressure values are very important in the selection of the valve. The quality and temperature of the fluid is a direct factor in the selection of the valve. The direction of the fluid and the arrow mark on the body are in the same direction and attention should be paid to the assembly. Since the solenoid valve does not function as a check valve, the fluid flows back at reverse pressures. In these cases, installing a check valve after the solenoid valve is correct for the connection. The line to which the valve is attached must be free of impurities.