Introduction
♦Vibration meter is used for measuring periodic motion, to check the imbalance and deflecting of moving machinery.

Feature:
♦Can display the parameters of Displacement, Velocity and Acceleration simultaneously.
♦In accordance with ISO 2954, used for periodic measurements, to detect out-of-balance, misalignment and other mechanical faults in rotating machines.
♦Specially designed for easy on site vibration measurement of all rotating machinery for quality control,commissioning, and predictive maintenance purposes.
♦Individual high quality ccelerometer for accurate and repeatable measurements.
♦Wide frequency range (10Hz~10kHz) in acceleration mode.
♦Optional headphones for use as electronic stethoscope.(Optional)
♦Bearing condition monitoring function.
♦Use USB/RS-232 data output to connect with PC.(Optional)
♦Provide Bluetooth data output choice.(Optional)

Specification:
♦Sensor: Piezoelectric Transducer
♦Measuring Range:
Acceleration: 0.1m/s²~400m/s² 0.3ft/s²~1312ft/s² 0.0g~40g Equivalent Peak
Velocity: 0.01mm/s~400mm/s 0.004inch/s~16.0inch/sTrue RMS
Displacement: 0.001mm~4.0 mm 0.04mil~160.0 mil Equivalent Peak-peak
♦Frequency Range:
Acceleration: 10Hz~10kHz
Velocity: 10Hz~1kHz
Displacement: 10Hz~1kHz
♦Accuracy: 5% of Reading+2 digits
♦Operating conditions:Temperature 0~50ºC, Humidity ♦Power supply: 2x1.5V AA(UM-3)Battery（Battery Not Included in the Package）
♦Dimensions: 130mmx76mmx32mm
♦Weight: 340g(Not Including Batteries)
♦Standard Accessories: Main Unit, Piezoelectric Transducer, Powerful Rare Earth Magnet Probe(Cone)&Probe(Spherical), Carrying Case(B04), Manual Book
♦Optional Accessories: Headset,RS-232C Data Cable with Software,Bluetooth Data Adapter with Software