Acrylic folding machine.Acrylic is one of the most used plastics in the market, so it is called acrylic folding machine.In principle, the principle of acrylic folding and other plastics is based on heat and soften the plate and then bend it, so it is also called hot acrylic bending machine.The previous denomination is relatively simple and is limited to a single material: since the acrylic plate is a type of plastic, it is called a hot plastic plastic plates or plastic plastic plates machine.

Precautions for use

1. Before using, check if there are strange objects covering the heating tank and eliminating any slag or similar strange objects.

2. Connect the feed to the cooling water pump and make sure the water circulates correctly.Do not dry.

3. Turn on the heating and slowly adjust the temperature regulation knob to the maximum scale.After the electrical heating cable is put red, set the knob to the appropriate scale.

4. To save electricity and guarantee safety, disconnect the heater after not using it for more than 3 minutes.

5. Prepare enough cooling water and its temperature should not exceed 6 ° C.An excessive temperature of the water can damage the heater and affect the thermal flexion effect.When the water temperature exceeds 65 ° C, the water pump will stop working automatically.Once the water temperature drops to the right temperature, the water pump will work again.

6. After using, disconnect the distribution head of the heating energy and, after 3 minutes (wait for the water temperature to fall slightly), disconnect the distribution head of the water pump.
7. Yes n