Slotting Cutter Arbors
Size: 80x247mm (midbody diameter: 80mmx length: 247mm)
Speed regulation method: Through the three-phase inverter output, adjust the inverter frequency to change the spindle speed.
Cooling method: water cooling
Power: 2.2kw
Voltage: 220V
Current: 10A
Frequency: 800Hz
Speed: 12000-24000rpm
- Poles: 4
Runout: less than 0.01mm
Diameter(mm):80
Bearing type: 2 x 7005 P4 DT and 2 x 7003 P4 DT
4 ceramic ball bearings fully sealed angular contact bearings
Chuck ER20
Clamping knife diameter: 13mm, 12mm, 12.7mm, 11mm, 10mm, 9mm, 8mm, 7mm, 6.35mm, 6mm, 5mm, 4mm, 3.175mm, 3mm, 2mm, 1mm (standard 6mm)
Water-cooled ER20 chuck block
Maximum lift: 3.2 meters;
Power: 75w;
Maximum flow rate: 3200L/H
line length: 1.4 meters
Voltage: 220V;
Frequency: 50 Hz
Size: 4 and 6 mm;
Size: 145*110*90mm