Gorilla 100% Silicone Caulk seals out water, air and moisture and is great for kitchen, bath, window, doors, auto, marine, plumbing, gutters and more! Ready for water exposure in just 30 minutes, this waterproof sealant is mold & mildew resistant. The white silicone sealant won't yellow, shrink or crack over time!
DIRECTIONS: All surfaces should be clean and free of dirt, grease, oil and old sealant. Best if used above 40°F.
1) Unscrew cap; fold and screw-on nozzle. Cut to desired bead size.
2) Apply sealant; pushing bead ahead of nozzle.
3) Smooth bead immediately after application; before a skin forms.
STORAGE: Replace cap tightly to prevent material from curing. Store in a cool; dry location. To re-use nozzle, remove sealant from nozzle once cured. STORE AWAY FROM CHILDREN AND ANIMALS.
CLEAN-UP: Wipe off wet sealant immediately with a dry cloth. Isopropyl alcohol may be used according to solvent manufacturer's instructions.
Service Temp: -40°F to 350°F (-40°C to 176°C)
NOTE: Do not use on wet, damp, frozen or contaminated surfaces. Not paintable. Not for use in underwater applications, aquariums, on brick, masonry, cementitious materials or on metals sensitive to corrosion including brass and galvanized metals. For general auto/marine applications only. Not for under hood or direct gasoline exposure. For gaps larger than ½” use backer rod. Can be exposed to water in as little as 30 minutes based on 3/16" bead at 70°F and 50% humidity. Otherwise, wait 24 hrs. Cured sealant is resistant to mold. Cured sealant must be cleaned regularly with soap and water to prevent growth on top of the sealant.