مميزات خاصة

Compitable Vehicle: for 1992 1993 1994 1995 Bronco/ F-350/ F-250/ F-150/ Aerostar/ Explorer. OEM/Part Number: F2UZ1522050A, F37Z1022050A. Packing list: 1 X Ignition Switch + 2 Door Lock Cylinder Matched Same Key
High Reliability: The mechanical structure is relatively simple and is not easily affected by electronic failures, signal interference and other problems. For example, when the vehicle's electronic system fails, the mechanical unlocking method of the key and lock cylinder can still be used normally to ensure that the owner can enter the car
Better Security: The lock cylinder adopts a special design and manufacturing process, has a certain anti-pry and anti-drilling ability, can effectively resist illegal damage by external forces, provide basic safety protection for the vehicle, and increase the anti-theft performance of the vehicle
Low Cost: Compared with some high-tech electronic locks, the manufacturing cost of mechanical lock cylinders is relatively low, which can reduce the cost of the replacement. For consumers, it also means that the cost of vehicle maintenance, replacement of lock cylinders, etc. is relatively low. Subsequent maintenance and maintenance generally only require simple maintenance operations such as regular cleaning and lubrication to ensure the normal use of the lock cylinder and key
Services Provided:We provide 24-hour service, if you have any questions about your purchase you can contact us at any time, we will try our best to solve it

وصف

Detailed Description

Product Name: Ignition Switch Door Lock Cylinder
Material: Plastic + Metal
Condition: 100% Brand new
Location: Left, Right, Front, Rear
Features: Easy Clean, Easy Installation, Self-Adhesive, Waterproof

Fitment

Fit for Aerostar 1994
Fit for Mercury Grand Marquis 1990-1991
Fit for Bronco 1992-1995
Fit for Pickup F150/250/350 1992-1995
Fit for Van E150/250/350 1992-1995
Fit for LTD Crown Vic 1990-1991
Fit for Ranger 1995

Reference Installation Steps:
1. Preparation:
Prepare the necessary tools, such as a flat-blade screwdriver, hexagonal wrench, etc.
2. Remove the old lock cylinder:
Open the car door, find the rubber cover on the inside of the car door, and carefully pry the rubber cover open with a flat-blade screwdriver.
After prying it open, you can see the hexagonal screw inside.
Loosen the hexagonal screw with a hexagonal wrench.
After the screw is loosened, gently remove the car door lock cylinder assembly.
Grasp the outer handle lock cylinder cover, pull it outward, and remove the old lock cylinder from the assembly.
3. Install the new lock cylinder:
Correctly install the new lock cylinder to the car door lock cylinder assembly.
Put the car door lock cylinder assembly back to its original position and tighten the hexagonal screw to ensure that the lock cylinder assembly is firmly installed.
Finally, install the rubber cover back to its original position and make sure it is tightly covered.
4. Inspection and test:
Close the car door, insert the key into the newly installed lock cylinder, turn the key, and check whether the lock cylinder's unlocking and locking functions are normal.
Make sure the doors lock and unlock normally and operate smoothly.

The installation method of the door lock cylinder may vary slightly for different models of Ford vehicles. If you encounter difficulties or uncertain steps during the installation process, it is recommended to refer to the relevant maintenance manual of the Ford vehicle, or consult a Ford dealer or professional car repair personnel.

Tips
Many times people will buy the wrong product because there is no correct match for the car model and year, please be sure to check the OE number of the product is the same as ours when you buy, if you have any questions, please feel free to contact us!

مرحبًا،

بحث

مفتاح الإشعال وأسطوانة قفل الباب مع ملاءمة مفتاح لـ Bronco F150 F250 F350 E150 E250 E350 Ranger 1992-1995 استبدال F3UZ1522050D

مميزات خاصة

وصف

منتجات شبيهه