Flowmeter
HT-60water pump flow switch
4 points to 4 points(15/20mm)
AC220V/50HZ.
FlowSwitchout screw diameter:20MM
Flowswitch inner screw 20mm
currect load:0.5A
Maximum power load: 90w
The starting capacity : 6-7L/min
After turning on the tap the flow wil push the plate to rotate.at a given positon the induction componet will be activated and the switch is on.the pump starts.the spring will force the plate to rotate back after turning off the tap.the induction component will be shut off and the pump stops.
The pipeline booster pump flow switch adopts the water flow type magnetic control device to carry out on-off control for the induction element.
To start and close the role of the pump. This product is widely used, mainly for the families of thousands of low water pressure area
Tap water pressure, especially for the low voltage ignition of the shower device is more important equipment, environmental protection
Equipment.
Technical characteristics:
1, stable. In the design of the induction room, magnetic control room, electronic components room separation, to avoid the pipeline iron containing material is magnetic material
Material adsorption, so as not to switch failure.
2, to high temperature. Using high temperature material production, the product can be used in cold and water conditions.
3, low water pressure start. The reset spring adopts the stainless steel material, and the function of the water pump is reached.
4, security: the use of electronic components as a control device, so that the use of products in the process of no spark, all closed.
Working principle:
The water flow in the pipeline is opened, and the flow direction of the water flow impulse induction door is rotated in the direction of the rotating shaft to the water flow direction.
Someone with axle loading, magnetron turning, positioning to west, triggering the sensing element, the switch on household condui