Flowmeter
Not offer battery. Thank you for understanding.
it can't work on higher than 4.5V flowmeter sensor
First, the key definition
Press the key from the left to the right for the set key "SET", plus the key "+", minus the key "-".
Second, show instructions
1, temperature
The temperature display range is -99 ° -999 °, the unit C is the Celsius temperature, and F is the Fahrenheit temperature.The temperature unit can be switched by pressing the "+" key.
2, the use of time / flow rate display
Flow in the flowmeter mode will automatically jump to the flow rate display, no water out of time display the total time (only in water pressure mode display time).The total time unit DAY that days, HRS said hours, time units can press the "+" key to switch.
The flow rate unit LPM means "liters / minute", GPM stands for "gallons per minute" and can be switched by pressing the "-" key.
The current interface number is displayed under other interfaces: 00 indicates the K value setting interface (K SETING).
3, power tips
The power prompt icon will be displayed when the battery is low and flashing, prompting the user to replace the battery.In the case of adequate power is not displayed.
4, faucet animation (only flow meter mode)
When water is detected, the faucet animation will begin to show water droplets.
5, the total water consumption, flow rate display
The total amount of water used in the unit L represents the rise, GAL means gallons, the unit can pass.When the total water consumption is less than 10000L (or GAL) will be accurate to the decimal point after the two, when the total water consumption is greater than 9999.99 L (or GAL) will hide the decimal point after the value.The maximum measurement 999999L (Note: to l as the quasi-if the unit set to GAL, is also full of 999999L cleared 0, that is, after the record 219969GAL cleare