Application:
For Universal fitment. (for Auto and Motorcycle with Air Bag Suspension System)

Specification:
--Dual Inlet & Exhaust ports for maximum flow (Plug extra inlet if not required).
--Filter mesh inside the hole to filter particles and other debris to prevent clogging of the solenoid valve.
--Equipped with 2 silencers to reduce the noise generated by the Solenoid Valve when working.
--Compact Layout for minimal space usage.
--The 6-position remote control offers fine-grained control options, custom settings and greater adaptability, with the ability to adjust the airbag lift height to suit individual needs and driving environment, enhancing the driving experience.
--No tee fittings needed to run analog or digital gauges.
--No tee fittings needed between inflate and deflate valve.
--Using less fittings means quickest response times and fewer places to leak.
--State normally closed, It is suitable for medium air, corrosive gas and so on, fatigue life test 10 million times, instruction Included.
--The interface thread sizes are 6 x 1/4 NPT and 2 x 1/8 NPT.

The diameter: 6.5.
The CV value: 0.2 flow.
Sealed material EPDM.
The work pressure: 0-200Psi. (Max: 230 Psi)
The leakage rate: 0.
The response time of : 3ms.
Amount power: 12.6W.
Working voltage: 12V.(Minimum: 8V)
Coil insulation grade: H/180 C.
The ambient temperature: -40 DEG C ~ +85 C.
Anti vibration: 10g/500HZ.
Package Included:
1x Valve controller
1*Control Box
1*Remote
1x Installation hardware
1x Wiring harness
2x Silencer
2x1/4NPT Plug
2x1/8NPT Plug
Professional Installation is Highly Recommended
if you have any question about our product, please contact us right away, we can handle any problems.