Suitable for the dealership or technician and you, you can easily access the OBD-II port without disconnecting the device and it will not protrude from the OBD-II port

It has 2 female connectors. Once it's plug in obd2 port, one female connector is upon the position of the original female obd2 port. The other female connector is with the extension cable, and you can use it for GPS tracker or other obd2 device.

It allows you to connect two OBD2 devices simultaneously, tight enough not to fall out even with it hanging upside down.

Does not add a ton of bulk to the existing connector and tucks away nice and clean. Perfect for attached permanent readers or performance tunes.
This cable can be installed under the dash and leaves the port open for diagnostics or any other OBD uses.

iKKEGOL OBD II OBD2 16 Pin Splitter Extension is the perfect solution for extending your current OBD II cables.
The cable features 1 male and 2 female connectors, the male right angle connector to male and female splitter pass though end.

Providing you with the flexibility to setup your vehicle's OBD system as needed.
With a length of 2FT/60CM, it's long enough to provide the reach you need without creating unnecessary clutter.

Made with high-quality materials, this extension cable is designed to last and provide reliable connections for your vehicle's OBD system.

Specifications:
Head type: OBD2
Car side: OBD J1962 Male Port
Device side: Dual J1962 Female
Wire: 16 Pin-to-Pin Extension
Length: 60 CM /24inch

Package Including:
1 x iKKEGOL OBD2 Splitter T Extension Cable