Motors
1 pcs & 4 Axis USBCNCMotion Control Card Interface 1Mhz
Supports all Mach3versions including the R3042040 version
Supporting Windows series no need to install any USB drivers and .
Full support for USB hot-swappable, the card is Monitoring USB connection status at any time.Under the operation of ,it can be reconnect automatically after disconnect.
Supports 4 axis linkage,including point to point move.
Supporting auto tool zero,electronic handwheel and software limit, difference
eliminating.
120M working frequency.Maximum step-pulse frequency is 1MHz. Perfectly drive servo andstepper motor in three ways: pulse / direction, CW / CCW, AB quadrature output.
Status indicator LED can be useful to show the USB connection, and working status byflashing.
16 general-purpose inputs, PNP or NPN input status can be configured in .
8 electronic switch outputs. Darlington open-drain output.
Measures real-time speed (Support the Hall element and quadrature encoder speedmasurement , etc.) and speed can be observed in March3 to perfectly support theapplication of . Perfectly support the lathe applications and other occasions,whitch requires precise speed.
Use external 12V-24V power supplyto isolate USB and external port,and to make thesystem more stable.
11 high-speed optical couplers with 10MHz, and 24 general optical couplers(Total optocouplerreach to 35 ) for isolating all of the input/output signals, isolation voltage up to 2KV
2 export interface:accurate 0-10V analog output, supporting converter to controlspindle drive; PWM output with 5V drop-down , providing PWM speed drive,CW/CCWoutput,puls/dir output and quadrature output for servo or stepping driver.
The output can be configured into any axis of the 4 shaft through the software.
2 external adjustment-knobto adjust the processing speed , speed and manual modeprocessing speed.
The 4 layers circuit board selected devices is exquisite.