Motors
1pcs &220vAC 22kw Metal Working Motor Water Cooling400Hz 800Hz Pole4Diameter 80mm
Size80x318mmMiddle body diameter80mmxLength272mmSpeed WaysThrough 3phase output inverter and adjust the inverter frequency to change the speed.
Cooling:Water cooling
Power Interface:Optional H20-4 pins waterproof air . The air marked "1 ","2"," 3"," 4", "1 ","2 ","3" were connected to
inverter (U, V, W), 4 connected inverter ground.
Power:2.2kw
Voltage:220v/380v
Current:10A / 5.5A
Frequency:400Hz / 800Hz
Speed:24000rpm
Pole:2 / 4
Runout Off:Less than 0.01mm
Diameter(mm):80
Bearing Type:2 x 7005 P4 DT & 2 x 7003 P4 DT
4pcs Ceramic Ball Bearingsfully sealed angular contact bearings
ColletER20
Clip Knife diameter13mm12mm127mm11mm,10mm,9mm,8mm,7mm, 6.35mm,6mm, 5mm, 4mm, 3.175mm, 3mm, 2mm, 1mm(standard 6mm)
Water Cooling ER16 collet chunk
Grease LubricationMain Application:Engrave for iron,steel,stainless steel, aluminum,hard wood etc.(This is professional metal , high accuracy,big )
Ceramic ball bearings,full sealed angular contact ball bearings,2×7005C P4 DT&27003C P4 DTincrease life
Pole4800Hzbig torqueprofessional metal used for iron steel stainless steel etc
Carefull assembly make the more precisional.
High accuracy,used for metal engraving,cutting.Precision0.01mm.
We are thespindlemanufacturer,we offer onlybest qualityandbest priceto you.
1. Our Ceramic ball bearings use4 pcs ceramic ball bearings.
2. Ceramic ball bearings areresistant to high temperatures and low heat, usually 3-5 degrees lower than steel ball bearings during using.
3. Ceramic ball bearings have low friction, low noise and long service life.
4. If you want to use the for aluminum, hard wood, then ceramic ball bearings better than steel ball bearings
There are 4 labyrinth seal in the front section of the ,prevents lu