Selector Switch
SJ-10 level switch is driven by micro motor. The drive shaft is connected with the clutch. When the material is not touched, the motor runs normally. When the blade contacts the material, the motor stops turning. When the blade contacts the material, the output of the test mounting still has a contact point. At the same time, the power supply is cut off and the rotation is stopped. When the material falls, the resistance of the blade is moored. Testing and assembling depends on the torsion spring to restore yttrium to the initial state of strand. It can be adjusted according to the torsion magnitude of M material with different ratios.
Product parameters:
1. Voltage with stand: AC 1500VX1MINUTE
2. Measuring : 0.1N.M 0.03-0.01N.M
3. Applicable Proportion: 0.5G/CM3
4. Connection mode: threads
5. Surface Material: Aluminum Alloy
6. Power supply: 220VAC 50Hz/24VAC
7. Power consumption: 4W
8. Contact Capacitance: SPTD5A/250VAC
9. Blade speed: 1R.P.M.
10. High temperature resistance 200 degrees
==========
Item Type : SWITCHES