Selector Switch
The rotary resistance material level switch, the lengthening rod object detector, the industrial limit sensor, the thread type.
Product parameters
Voltage withstand: AC 1500VX1MINUTE
Measuring : 0.1N.M 0.03-0.01N.M
Applicable Proportion: 0.5G/CM3
Connection mode: threads
Surface Material: Aluminum Alloy
Power supply: 220VAC 50Hz/24VAC
Power consumption: 4W
Contact Capacitance: SPTD5A/250VAC
Blade speed: 1R.P.M.
SJ-10 level switch is driven by micro motor. The drive shaft is connected with the clutch. When the material is not touched, the motor runs normally. When the blade contacts the material, the motor stops turning. When the blade contacts the material, the output of the test mounting still has a contact point. At the same time, the power supply is cut off and the rotation is stopped. When the material falls, the resistance of the blade is moored. Testing and assembling depends on the torsion spring to restore yttrium to the initial state of strand. It can be adjusted according to the torsion magnitude of M material with different ratios.
==========
Item Type : SWITCHES
Voltage withstand : AC 1500VX1MINUTE
Measuring : 0.1N.M 0.03-0.01N.M
Applicable Proportion : 0.5G/CM3
Connection mode : threads
Surface Material : Aluminum Alloy
Power supply : 220VAC 50Hz/24VAC
Power consumption : 4W
Contact Capacitance : SPTD5A/250VAC
Blade speed : 1R.P.M.